HC Vertical Cutting Dryer

Original
price: Negotiable
minimum:
Total supply:
Delivery term: The date of payment from buyers deliver within days
seat: Tianjin
Validity to: Long-term effective
Last update: 2017-10-15 22:52
Browse the number: 332
inquiry
Company Profile
 
 
Product details



Description

HC Vertical Cuttings Dryer is used in the drilling industry for recovery oil from the drilling cuttings.In drilling operations, typical solids control equipment discards 1-4 barrels of liquid for each barrel of solids removed.GN drilling cuttings dryer system consisting of Vertical cuttings Dryer and the relevant equipment could discharge 1 barrel of liquid for 4 barrels of solids removed.GNCD930 vertical cuttings dryer has proven to reduce this liquid to below 5% (OOC) by weight by site test:

1.Reduce the amount of OBM or SBM on cuttings discharge to reduce waste volume and meet environmental objectives.

2.Recover valuable base fluids for reuse and lower the cost.

3.Reduce fluid content prior to other treatment, thereby increasing process capacity.

In short, GNCD930 Vertical Cuttings Dryer could help you meet environmental objectives by reducing waste volume, maximizing liquid recovery and reducing your project cost.GN Solids Control can provide all-around mud recycling and treatment equipment.

Features and Benefits for HC Vertical Cuttings Dryer

1.The flights are made from hard high chrome alloy material to be anti-abrasive from solids and ensure long operational life vertical cuttings dryer.

2.Air Knife is Provided for cleaning the screen to avoid screen blinding.

3.Balance testing for all major rotary components to minimize vibration & noisy

4.Individual oil lubrication system with automatic alarm for pressure limit.

5.Screw conveyor installed under the dryer to pick up the dry solids for continues operation.

6.Cleaning pump provided for avoiding solids accumulation in the cuttings dryer

HC690 cuttings dryer is a single stage continuous phase vertical screen centrifuge that has proven to reduce the oil on cuttings to as low as 5% by dry weight and typically achieves below 5% OOC levels. HC690 Vertical cuttings dryer is capable of processing over 40-50 tons per hour and can deliver dry solids under the most severe loading. HC690 Cuttings Dryer has been used on many types of fluids, including drilling fluids of both synthetic and oil based mud. As with all solid control equipment, like shakers, centrifuges and cyclone separator, viscosity will have an impact on performance. Viscosity is determined by many factors including solids content, solids size, fluid type and fluid temperature.

In drilling operations, typical solids control equipment discards 1-4 barrels of liquid for each barrel of solids removed.HC drilling cuttings dryer system could discharge 1 barrel of liquid for 4 barrels of solids removed. This recovery is measured after processing through the solid bowl decanting centrifuge.
The drilling fluid from vertical cuttings dryer contains a percentage of low gravity fine solids that should be treated by a high speed centrifuge before the mud can be returned to the active system. This may not be necessary in all conditions. The cuttings dryer screen bowl is available with different mesh openings.
Other than the vertical cuttings dryer itself, other equipment could include a support stand and a high-speed centrifuge with feed pump and stand. Additional equipment may include the feed system, whether auger, vacuum transfer system, or positive displacement feed pump package.

Installation time varies greatly with conditions and is dependent on many things, most importantly a proper survey prior to installation. Installation time is achievable within 2 or 3 days if no hot work is needed.

Vertical Cuttings Dryer Parameter
Model HC670 HC670A HC690 HC690A
Capacity  20-40 Tons/H 30~50 Tons/H
Drying Efficiency  OOC ≤ 5%
Screen Max Diameter  730mm 930mm
Screen Opening  0.25/0.35/0.5mm
Rotation Speed  1200/1500RPM 0-1200RPM/0-1500RPM 900RPM/1200RPM 0~900RPM/0-1200RPM
G Force 588 or  918 G 420 or 750 G
Oil Tank Capacity  48L 48L
 Air Knife Input Pressure 0.69Mpa 0.69Mpa
 Air Knife Input Capacity  1.4m³/m 1.8m³/m
Flushing Pump Qty  1pcs
Main Motor  37Kw 55Kw (75HP)
Oil Pump  0.55Kw(0.75HP) 0.55Kw(0.75HP)
Flushing Pump Power  4Kw(5.5HP) 4Kw(5.5HP)
Ex Standard  ExdIIBt4 / IEC EX/ ATEX
Electric Cabinet  Exd Positive Pressurized Exd Positive Pressurized
Weight  3200Kg 3016Kg 4600Kg 4400Kg
Dimension  2265x1518x1310mm 2640×1810×1650mm

★ Commissioning and Installation

We offer entire installation and commissioning service until the machine work properly. We offer three years guarantee to buyer, as buyer offer transportation international and boarding charges in local places. After three years, any problem we still will charge for buyer under a reasonable fee


Total0bar [View All]  Related Comments
 
more»Other products

[ Products search ] [ favorites ] [ Tell friends ] [ Print ] [ Close ]