Economical System Rapid-Rate Cycling Thermal Shock Test Chamber
Designed for quick changes in specimen temperature
Precision 'linear' temperature ramping.
Through simulation of wind volume and wind speed, it can minimize specimen temperature variations, enabling more accurate quick temperature change testing. For specimen temperature, the ramp rate is 15°C/min. For air temperature,the ramp rate is 23°C/min (temperature heat-up average).
To maintain a constant temperature change rate for test specimens, it uses a sensor (positioned by the user)for specimen temperature measurement,and a newly-developed high-speed controller that enables highly precise specimen temperature control. This controller enables measurement and control processing at a higher speed than conventional controllers.
Features
● Large-volume test area The test area can contain up to sixty substrates, when set vertically
●Easy wiring access Clear cabinet sides allow easy access for specimen measurement
●Cable ports are provided on the right as well as left sides of the chamber
●Door hinge with self-closing prevention
Site requirements:●Main Power: North American standard 208V (alternate international power: 200V, 220V, 380V, or 400V)
●Cooling water supply
●Quiet operation with sound levels below 65dB
Available options:●Paperless recorder with color display and CompactFlash storage
●Strip chart recorder
●Computer interface (RS-232)
●Overcool protection
●Casters
●Specimen basket / shelf bracket
Technical Parameters of Thermal Shock Chamber
Model |
GTS-056 |
GTS-087 |
GTS-126 |
||||
Test zone size W*H*D(mm) |
400*350*440 |
500*350*500 |
600*350*600 |
||||
Exterior chamber size W*H*D(mm) |
1500*2050*2120 |
1600*2050*2220 |
1700*2050*2320 |
||||
Preheat temperature range |
+200℃ |
||||||
Precool temperature range |
-60℃ -75℃ |
||||||
Test temperature range |
+60℃~+150℃; -10℃~-50℃;-10℃~-65℃ |
||||||
Performance |
Temperature fluctuation |
±2℃ |
|||||
Temperature recover time |
Within 5 minutes |
||||||
Heat up time |
℃ |
150 |
150 |
150 |
|||
min |
30 |
35 |
40 |
||||
Cool down time |
℃ |
-50 -65 |
-50 -65 |
-50 -65 |
|||
min |
60 70 |
70 80 |
80 90 |
||||
Material |
Exterior chamber material |
Stainless steel plate+ Power Coated |
|||||
Inner chamber material |
SUS#304 stainless steel plate |
||||||
Insulation |
PU& Fiberglass wool |
||||||
System |
Wind Circulation |
Sirocco fan |
|||||
Heating system |
SUS#304 stainless steel high-speed heater |
||||||
Cooling |
Imported compressor, finned type evaporator, air-cooling condenser |
||||||
Controller |
LCD touch panel controller |
||||||
Other Components |
Vaccum glass inspection window, cable port(50mm), control status |
||||||
Safty Devices |
Overheating circuit-breaker,compressor overload protection,control |
||||||
Power Supply |
AC3φ380V 60/50Hz |
||||||
Customization |
Customization of inner chamber size, tempreture&humidity range,ect. |
Grande Electronics is one of the largest economical system rapid-rate cycling thermal shock test chamber manufacturers and suppliers in China and also known as one of the famous chamber brands. Our discount product is mainly featured by good performance and flexibility and low price. Welcome to order the customized and cheap chamber made in China with our factory.